LPG Road Tanker with measuring System Ma7, Compressor unit Fas-/Blackmer 161, Pump Unit and Two Hose Reels

LPG ROAD TANKER EQUIPMENT 

Our customers take advantage of a complete package of LPG valves and accessories for road tankers offered. The advantages comprise the determination of material requirements and technical support up to layout and adjustment of components, as well as the dispatch of the complete package. We have extended our market share in this segment considerably by means of our consolidated expert knowledge as well as technical consulting and after sales service. In addition FAS disposes of a large stock of all current components customary in this particular market and of spare parts so that short-term requirements can be handled. We are also able to provide higher numbers of complete sets within shortest. Our expert staff repairs defective road tanker equipment in our workshop in Salzgitter.
We supply the complete road tanker equipment such as e.g.:

Measuring systems optionally with printer, such as e.g.: CORIOLIS-Masse

• Durchflussmessgerät LPG-mass, PROMASS 80E, PROMASS 83E, PROMASS 84F
• LC-Measuring systems MA5, MA7, MA15

Pumps and pumpunits, such as e.g.:Corken Z2000, Z3200, Z4200

• FAS-NZ Series
• STERLING SIHI Pumps  CEH, CEHA  3106, 4106, 5106, 6106 Series
• Blackmer LGB1, LGL2″, LGL 3″, LGL 4″
• Further types and manufacturers on request

Compressors and compressor units, such as e.g.:

• FAS-/Blackmer 161, 162, 361, 362, 601, 602, 942 FAS-/Corken 91, 291, 491, 691, 891
• Further types and manufacturers on request.

Hosereels

Instruments de mesure et robinetterie montés sur le trou d’homme du camion petit et gros porteur ( ou semi-remorques )

FAS-Magneticliquid level gauges
Valves and Robineeterie , telque :

• Vannes ¼ de tour à brides
• Vannes ¼ de tour 3 pièces
• Pompes à palettes Corken
• REGO Internal valves
• Filler connections
• Ball valves
• Safety relief valves
• High pressure hoselines / flexible hoselines
• Strainers
• Wheel wedge
• cable drums
• furthuer customer-specific components

MID-measuring Plant FAS-Cori 400 EU with Operator keyboard, Printer and Hose reel

Nos produits sont prêts à être expédiés vers les pays suivants : Algérie, Bénin, Burkina Faso, Burundi, Cameroun, Cap-Vert, Centrafrique, Comores, Congo-Brazzaville, Congo-Kinshasa, Gabon, Guinée, Guinée-Bissau, Guinée équatoriale, Madagascar, Mali, Maroc, Mauritanie, Mozambique, Niger, Rwanda, Sénégal, Tchad, Togo, Tunisi,  Libye, Angola, Ghana, , Egypte, Ethiopie, , Mozambique,  Nigeria, Kenya, Tanzanie et plus.

Nous fabriquons également des conteneurs-citernes ISO conçus pour le transport en toute sécurité du gaz de pétrole liquéfié (GPL) par route, rail, voie navigable et maritime. Les conteneurs peuvent également être utilisés pour le stockage temporaire ou comme option alternative de stockage de secours du GPL pour différentes technologies.

Les conteneurs-citernes sont fabriqués et certifiés selon les normes internationales PED, ISO 1496-3, CSC, ADR.

Nos réservoirs sont fabriqués selon la norme allemande Merkblatt AD-2000, sont certifiés selon la directive européenne sur les équipements sous pression 2014/68/UE et portent le marquage CE.

RegO Internal Valves

Les vannes GPL internes RegO sont faciles à installer et conçues pour permettre un fonctionnement fluide et des débits de pompage plus élevés sans cavitation ni perte d’efficacité afin de vous faire gagner du temps et de l’argent. Ils disposent de fonctionnalités de sécurité telles qu’une fonction de débit excessif intégrée et une protection contre les dommages externes : tous les composants de fonctionnement critiques sont situés dans le corps de la vanne. S’ils sont cisaillés, les composants restants restent dans le réservoir.

Les vannes GPL internes RegO nécessitent un entretien moins fréquent que les autres vannes internes, et la maintenance est rapide et facile. Nous prêtons attention aux détails, tels qu’une prévention supérieure de la corrosion et la fixation des fixations afin qu’elles ne se détachent pas et ne causent pas de dommages.

RegO internal valve options:

• Threaded, flanged, and double flanged options
• Threaded versions can be installed in full or half couplings
• Manual, pneumatic, rotary, and electric activation

DATA SHEET

A3129FA Series
DATA SHEET

A3217DA Series
A3127DA Series
DATA SHEET

A7883FK Series
Flomatic^® Valves
DATA SHEET

A7853A Series
3-Way Valve
DATA SHEET

A3213D Series
DATA SHEET

A3212R Series
DATA SHEET

A3209D Series
DATA SHEET

A3211D Series
DATA SHEET

RegO Globe Valves

RegO globe valves are constructed with high-quality materials and come in a range of sizes for use in LPG bobtail and tanker truck applications. Purposefully designed to ensure greater flow with no pressure drop, positive shut-off and long maintenance-free service, our globe valves provide safety and peace of mind for years. RegO globe valves include these standard features:

• “V”-ring spring-loaded pressure stem seal provides for leak-proof operation, with no packing to re-tighten or replace, while virtually eliminating hard-to-turn handles.
• Swivel seat disc assembly stops rotating as soon as it touches the body seat to deliver good seat alignment and long life.
• Size ranges: 1/2″ to 3″ F. NPT, and 1 1/2″, 2″ & 3″ flanged versions

A7505AP Series
DATA SHEET

A7517AP Series
DATA SHEET

A7517FP Series
DATA SHEET

HA7513AP
The HA Series has a built in backcheck.
DATA SHEET

HA7514AP
The HA Series has a built in backcheck.
DATA SHEET

RegO Transport Components

Back Pressure Check Valves

A3146 Series A3186 Series

RegO Back Pressure Check Valves are designed to allow flow in one direction only. When the flow stops or reverses, the check closes. Built to provide generous flow channels for low pressure drop, the heavy-duty construction and synthetic rubber seat discs deliver positive seals for years.

DATA SHEET

Pressure Release Valve

A8430 Series

These low profile, internal relief valves are constructed of non-corrosive materials and the RegO “pop-action” design ensures maximum protection.

DATA SHEET

External Hydrostatic Relief Valves

3125 Series
3127 Series
3129 Series
SS8000 Series

Protects piping and shut-off valves against possibility of trapping LPG. Automatically reseats firmly after discharge, provides a “bubble-tight” seal, and available in both brass and stainless steel.

DATA SHEET

Rotogage^® Assemblies 

A9090 Series

Designed to provide an accurate determination of LPG container contents, they mount in a standard 1” NPT coupling. Resistance-free nylon bearing inserts reduce friction and promote operating ease, and the dial face is dual calibrated to provide greater accuracy in reading contents in containers which are not level.

DATA SHEET

RegO Hose End Valves

Hose End Valves

A7797A Series
A7793A Series

DATA SHEET

The A7797A and A7793A Series vastly reduces the amount of product vented when disconnecting bobtail delivery trucks, dispensing systems and anhydrous ammonia nurse tanks. These valves provide instant, full-on flow at the flip of a handle. Shut-off is instant and the handle locks for added protection.

Features:

• Minimizes product venting loss when disconnecting, instantly by housing the seat disc at the bottom of the built-in ACME filling connector
• V-Ring spring loaded pressure seal design provides for dependable leak-free operation
• Low emission design minimizes product venting loss when disconnection
• Vents less than 2cc of liquid when used with RegO low emission fill valve
• Self-locking handle helps prevent accidental opening of the valve
• Operator friendly contoured handle rotates 360°, large filling grip connector is easy to use
• Easily field-maintained

Hose End Valves

A7914A Series

DATA SHEET

The A7914A Series low emission valve is designed to reduce the amount of product vented when disconnecting bobtail and transport loading hoses. Press the release trigger while lifting the easy-grip handle for full-on flow, lower the handle for an immediate stop and lock. This valve can be used with any standard 31⁄4″ Male ACME connector, or our 6588LE and 6589LE minimum loss filler valves.

Features:

• Vents less than 2 cc of liquid when disconnected from a 6588/89LE low emission ACME Adapter. California CARB Compliant
• Self-locking handle is operator opened and closed, designed to prevent accidental opening of the valve
• Contoured handle rotates 360°, large easy-to-turn ACME swivel connector
• Protective screen on inlet side prevents debris from entering
• Spring-loaded Teflon “V” packing for bonnet/stem assembly provides long service life

Low Emission ACME Adapter

6588LE Series
6589LE Series

DATA SHEET

The 6588LE/6589LE Series low emission ACME adapter is UL listed and designed for use with the A7914A hose end valve. When used together, they provide fast filling of LPG bobtails, transports, and large bulk storage tanks, and a low-emission disconnect.

Features

• 31⁄4” Male ACME adapter reduces emissions at disconnect to just 10.5 cubic centimeters of LPG
• Safety groove is designed to shear below ACME threads leaving the valve seat closed and unaffected if the vehicle pulls away with the hose connected
• Seat disc is made of synthetic composition and is mechanically held in place by a seat disc retainer
• Stainless steel return spring, one-piece poppet stem for smooth operation

RV-550_Relief_Valves

RegO Bobtail and Transport Accessories

RegO supplies the accessories you need and you can count on them to be built with the same quality and engineering that goes into our valve products.

Quick-Acting Hose End Valves

A7707L Series
A7708L Series

Delivers full-on flow at the flip of the handle, positive shut-off with a handle lock for added protection. The “V”-ring spring-loaded pressure stem seal provides for leak-proof operation—no packing to re-tighten or replace. Full swivel handle rotates 360° so the valve can be operated from any angle. Can be used with a variety of RegO filling adapter connectors.

DATA SHEET

Extended Type Hose Couplings

A7570 Series

Simplified, yet rugged design eliminates an extra joint and provides smooth, uninterrupted flow and stands up to repeated use. The free swivel action between tailpiece and handle allows for easy make-up, while the limited travel of the handle on the tailpiece minimizes spin-off, encouraging cautious removal to properly bleed off trapped product to ensure closure of the filler valve and hose end valve.

SALES SHEET

ACME Female Connector

3170 Series
3180 Series
3195 Series

Designed especially for liquid and vapor transfer of LP-Gas and anhydrous ammonia. Available in a variety of M. NPT and F. ACME connections.

DATA SHEET

Hose End Adapters

3179 Series
7577V Series
7576 Series

Designed with minimal flow restriction and an integral check valve, these adapters ensure fast flow, while protecting against product loss due to a tank filler valve failing to close.

DATA SHEET

ACME adapter

5760 Series

Available in brass or plated steel. 5769 Series available with the stainless steel screen screen to prevent debris from impeding the action of valves and components of LPG systems.

DATA SHEET

ACME Cap

3184 Series
3194 Series

Available in four sizes, these rugged caps stand up to everyday abuse to protect the coupling tip, as well as prevent the entrance of dust, moisture, and other contaminants.

DATA SHEET

RegO Filling Safety Systems

At RegO provides a complete line of LPG transport safety products built with RegO ingenuity and quality to deliver years of safe operation at truck and transfer.

Pull-away Coupling

A2141 Series

Designed to stop gas escape upstream and down- stream in the event of a pull-away. A true pull away, this coupling snaps together without any repair or additional parts. Buna-N seals for a leak tight seal.

DATA SHEET

Swing Check Emergency Safety Valves (ESV)

6010 Series
6016 Series
6024 Series

Designed for LPG transfer lines to provide quick shut off of liquid or vapor in the event of an accidental pull-away, line break, or hose rupture. Fusible thermal element auto-shuts valve when exposed to fire. Available with flanged or threaded connections, Viton and Buna-N seat seal options, and a choice of manual, pneumatic, rotary, or electric activation.

DATA SHEET

RegO Internal Valves

RegO internal valves are easily installed and designed to enable smooth operation and higher pumping rates without cavitation or loss of efficiency to save you time and money. They require maintenance less often than other internal valves, and the maintenance is fast and easy. We pay attention to the details, such as superior corrosion prevention and securing fasteners so they don’t come loose and cause damage.

RegO valves are available in manual, pneumatic, electric, and rotary options.

3200 Series

INTERNAL VALVES SALES SHEET

RegO Flomatic^®

Automatically closes should downstream line rupture causing loss of pump differential pressure required to keep the valve open.

FLOMATIC SALES SHEET

---

RegO Relief Valves

RegO relief valves provide superior protection matched with a long service life. Specifically designed for large stationary pressurized containers our manifold designs provide for an extra relief valve, not included in the flow rating, to enable service or replacement without evacuating the container.

RegO MultiPort^® Valves

A8560 Series
A8570 Series

RegO MultiPort relief valve manifolds are used as the primary relief device on LPG bulk storage tanks with flanged openings. The handwheel selectively closes the entrance port to enable service or repair without tank evacuation. RegO “pop-action” design ensures maximum protection, with minimum product loss when replacing a relief valve.

DATA SHEET

RegO DeltaPort^TM Valves

8530 Series
AA8350 Series

RegO DeltaPort relief valve manifolds are designed to be the primary relief device on LPG bulk storage tanks. The handwheel selectively closes the entrance port to enable service or repair without tank evacuation.

DATA SHEET

Internal Relief Valves

7534 Series
6542 Series

These low profile, internal relief valves are constructed of non-corrosive materials and the RegO “pop-action” design ensures maximum protection, with minimum product loss on relief.

DATA SHEET

---

RegO Globe Valves

RegO A7500 Series globe valves are constructed with high-quality materials and come in a range of sizes for use in LPG bulk storage applications. Purposefully designed to ensure greater flow with less pressure drop, positive shut-off, and long maintenance-free service; our globe valves provide safety and peace of mind for years. RegO globe valves include these standard features:

• “V”-ring spring-loaded pressure stem seal provides for leak-proof operation, with no packing to re-tight- en or replace, while virtually eliminating hard-to-turn handles.
• Swivel seat disc assembly stops rotating as soon as it touches the body seat to deliver good seat alignment and long life.
• 1⁄4” F. NPT plugged boss on the downstream side of the valve body allows attachment of a hydrostatic relief valve or vent valve.

A7500 Series

This is just a sample of our A7500 Series globe valves. See the complete family and specs.  DATA SHEET

---

RegO Safety Systems

At RegO, system and operational safety are paramount. We provide a complete line of products built with RegO ingenuity and quality to deliver years of safe operation.

Back Pressure Check Valves

A3186 Series

RegO Back Pressure Check Valves are designed to allow flow in one direction only. When the flow stops or reverses, the check closes. Built to provide generous flow channels for low pressure drop, the heavy-duty construction and synthetic rubber seat discs deliver positive seals for years.

DATA SHEET

Pull-away Coupling

A2141 Series

Designed to stop gas escape upstream and downstream in the event of a pull-away. A true pull away, this coupling snaps together without any repair or additional parts. Buna-N seals for a leak tight seal.

DATA SHEET

Heavy Duty Swing Check with Flow Indicator

A7624/A7616

Available in 2” and 3” connections, this back check valve provides back flow protection for the unloading riser. Easy-to-read indicator, heavy-duty spring-loaded swing check design, delivers high flow rates with low pressure drop.

DATA SHEET

Swing Check Emergency Safety Valves (ESV)

6010 Series
6016 Series
6024 Series

Designed for LPG transfer lines to provide quick shut off of liquid or vapor in the event of an accidental pull-away, line break, or hose rupture. Fusible thermal element auto-shuts valve when exposed to fire. Available with flanged or threaded connections, Viton and Buna-N seat seal options, and a choice of manual, pneumatic, rotary, or electric activation.

DATA SHEET

---

RegO Bulk Tank Accessories

RegO supplies the accessories you need and you can count on them to be built with the same quality and engineering that goes into our valve products.

ACME Low Emission Hose End Valve

A7914A

Vents less than 2 cc of liquid when disconnected (when connected to RegO low emission ACME filler valves 6588LE, 6589LE.). This valve provides a full-on flow when pressing the release trigger. Compatible with any standard 31⁄4” male ACME connector. California CARB Compliant.

DATA SHEET

Sight Flow

Indicators A7790 Series

Designed to promote maximum pump and compressor efficiency, these indicators enable visual inspection of liquid flow. The integral swing check also serves as a back-check valve to prevent reverse flow and product loss if the hose fails in a loading operation. Durable ductile iron body ensures long, trouble-free operation with design working pressure of 400 PSIG.

DATA SHEET

Rotogage^® Assemblies 

A9090 Series

Designed to provide an accurate determination of LPG container contents, they mount in a standard 1” NPT coupling. Resistance-free nylon bearing inserts reduce friction and promote operating ease, and the dial face is dual calibrated to provide greater accuracy in reading contents in containers which are not level.

DATA SHEET

External Hydrostatic Relief Valves

3125 Series
3127 Series
3129 Series
SS8000 Series

Designed especially for the protection of piping and shut-off valves where there is a possibility of trapping liquid LP-Gas or anhydrous ammonia. Available in both brass and stainless steel.

DATA SHEET

ACME Female Connector

3170 Series
3180 Series
3195 Series

Designed especially for liquid and vapor transfer of LP-Gas and anhydrous ammonia. Available in a variety of M. NPT and F. ACME connections.

DATA SHEET

RegO Ready-to-go LPG Tank MultiValve®

BENEFITS FOR LPG MARKETERS:

RegO MultiValves contain UL-listed, factory installed and tested Presto-Tap fitting that provides a quick and easy, cost-effective method of performing a system leak test that saves you time and money while reducing emissions by up to 90%

Field repairable RegO MultiBonnets provide quick and easy repair of bonnet packings without the cost of emptying the tank.

PG8575RL Series

The most complete MultiValve assembly in the LP-Gas industry.

Designed for use in single opening underground ASME containers up to 639 sq. ft. surface area, and above ground ASME containers up to 192 sq. ft. surface area.

Combines low emission double back check filler valve, vapor equalizing valve, pressure relief valve, MultiBonnet service valve, fixed liquid level gauge, “junior” sized float gauge flange opening and factory installed and tested Presto-Tap.

DATA SHEET

PT7556R Series

These compact MultiValves are especially suited for vapor withdrawal of ASME containers where compact groupings of components are necessary. Separate filler valves andpressure relief valves are required.

Combines MultiBonnet service valve, vapor equalizing valve with excess flow, fixed liquidlevel gauge and factory installed and tested Presto-Tap.

DATA SHEET

PT9102R Series

Designed for vapor withdrawal service on ASME and DOT containers or in fuel line applications. Since none of these valves have an integral pressure relief valve, they may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that container’s capacity.

Combines MultiBonnet service valve and Presto-Tap value added features into one unit.

DATA SHEET

PT6543 Series
PT6542 Series

These MultiValves permit vapor withdrawal from ASME containers up to 50 sq. ft. surface area and DOT containers up to 420lb propane capacity. They allow on-site cylinder filling without interrupting gas service.

Combines high capacity double back check filler valve, MultiBonnet service valve, fixed liquid level gauge, pressure relief valve and factory installed and tested Presto-Tap.

DATA SHEET

CONTACT US 

autres Equipements pour les équipements de transport GPL:

– API BALL valves , Gate Valves ANSI, DIN, ASME

– Limiteur de débit

– Cuves citerne réservoirs GPL-C

– Clapets de reprise liquide

– Clapets anti-retour

– Double clapet de remplissage

– Adapteurs de sécurité

– Soupapes de sureté

– Clapet d isolement pour soupapes de sureté

– Collecteur REGO

– Jauges magnétiques cuves GPL

– Jauges magnétiques camions

– Jauges rotatives

– Jauges coulissantes

– Manomètres

– Thermomètres

– Contrôleur de circulation

– Détendeurs

– Limiteurs de pression

– Raccords ACME

– Joints, bouchons ACME

– Raccords NPT

– Raccords chambrés

– Raccords WECO

-Bornes de dépotage

– Brides / Joints Klingérite

– Robinets gaz petit vrac

– Multivannes  Gaz GPL

– Robinets et Vanne BS à rappel ressort Apollo DN20 FF BSP pour GPL et Aviation  Apollo Deadman ball Valves

En outre, nous fournissons des équipements pour les camions-citernes, les ravitailleurs, les semi-remorques JET :

• • Into aircraft pressure refuelling couplings ( ISO 45) . ( voir plus)
  • Hydrant dispenser intake couplings. ( voir plus)
  • Chariot d’hydrant pour aéroport ( Hydrant dispensers Equipments)
  • Inline pressure control/deadman valves. ( voir plus)
  • Tank bottom loading automatic high level cut off systems. ( voir plus)
  • Fuel hydrant pit valves. ( voir plus)
  • Pressure contol venturis.( voir plus)
  • Unisex couplings. ( voir plus)
  • Digital pressure control systems. ( voir plus)
  • Full range of spare parts in stock. ( voir plus)
  • EI 1581 approved filter water separator vessels and replacement elements. ( voir plus)
  • EI 1590 approved microfilter vessels and replacement elements. ( voir plus)
  • EI 1583 approved water absorbing monitor vessels and replacement elements. ( voir plus)
  • Clay filter vessels and replacement cartridges. ( voir plus)
  • Industrial filter elements, band filters and precoat filters. ( voir plus)
  • Electronic water monitoring systems. ( voir plus)
  • Electronic filter differential pressure monitoring and control systems. ( voir plus)
  • Minimonitor and multi minimonitor ‘Millipore’ type contamination test kits and consumables including colormetric and gravimetric capsules. GTP 1172 GTP-172-1172-mark-ii  ; Kit Includes: 1x Carrying case (GTP-9466) 1x Multimonitor assembly (GTP-1172H), Comprising of; 1x Flushing head valve and monitor assembly (GTP-3466) 1x Bonding and grounding hose assembly (GTP-1110) 1x Bypass quick disconnect and hose assembly (GTP-1250) 1x Bypass tee (GTP-302C) 1x Double ended adapter (GTP-988) 1x Syringe (GTP-165) 1x Sampling kit (GTP-5) 1x Tweezers (GTP-2099) 1x Color rating booklet (GTP-1074-1) 6x Plastic monitors (GTP-1985-6) 15x Mini envelopes (GTP-1267) 1x Minotor Opening Key (GTP-9182) ( voir plus)
  • Direct reading filter differential pressure gauges.    GTP-534-30A with scale 0-30 psi ( voir plus)
  • Fuel sampling probes and test fittings. ( voir plus)
  • Spring rewind bonding reels. ( voir plus)
  • Tank floating suction assemblies.
  • Aqua Glo kits for the measurement of water concentration in hydrocarbon fuels.
  • Complete range of fuel quality checking equipment
  • Aircraft refuelling hoses to ISO 1825. (EN1361)
  • Trigger nozzles for aviation refuelling and general petroleum duty.
  • Flexible pipework connections.
  • Hose end fittings and reducers.
  • Copper braid cored clear PVC and high visibility green covered bonding cable.
  • Steel cored clear PVC covered bonding cable.
  • Heavy duty bonding clips, a wide range is held in stock.
  • Tanker earthing sockets/suzie cables and bolt on earth pins.
  • Static earth system continuity testers.
  • Hand rewind lanyard reels for aviation refuelling vehicles. ( voir plus)
  • Steel cored red PVC covered aviation lanyard cable with or without fitted ends and carbine hook.
  • Hand rewind electric deadman reels for aviation refuelling vehicles.
  • Deadman handswitches, coiled twin core orange suzie cables and associated weatherproof plugs and sockets.
  • Battery isolation switches, boost plugs and sockets for aviation refuelling vehicles.
  • ATEX approved lamps with clear or coloured lenses for use on aviation refuelling vehicles.
  • Plate forme d’avitaillement (Chariots avitailleurs, Passerelles d’Avitaillement Heuteur Fixe et Ajustable Tractable, Escabeau Avitaillement  pour l’aéronautique avec crochet porte-tuyau et roues de déplacements)
  • Automatic air eliminators. ( voir plus)
  • Aviation hydrant dispenser airfuel sense hose. ( voir plus)
  • Hosereels, hand and power rewind. ( voir plus)
  • Fuel sample collection and recovery tanks and complete systems, mobile or fixed.
  • Pit flags and flag poles for the clear identification of aviation fuel hydrant pits during refuelling operations.
  • High visibility hydrant dispenser intake hose sleeves. ( voir plus)
  • Jet A1 and Avgas colour coded hose sleeves to identify the fuel grade during overwing aviation refuelling.
  • Sandwich pattern non return valves in Aluminium, Carbon Steel, Ductile Iron and Stainless Steel.( voir plus)
  • Sandwich pattern butterfly valves, in Ductile Iron, Steel, Stainless Steel and Aluminium. ( voir plus)
  • Basket strainers in Carbon Steel and Stainless Steel.
  • Composite wire reinforced hoses for tanker and rail car loading and offloading.
  • Sight flow indicators for use in pipework systems. Available in Carbon Steel or Stainless Steel, flanged or threaded.
  • Kamlok couplings in Aluminium, Stainless Steel and Brass. ( voir plus)
  • Threaded BSP hose couplings, dustdrip caps and connectors in Aluminium, Gunmetal and Stainless Steel.
  • Pressure gauges manufactured from Stainless Steel, dry or Glycerine filled.
  • De-aerator vessels and high capacity air release heads.
  • Clear glass jars for fuel sampling.
  • Wire carrying cages for glass jars.
  • Contrôle de qualité produit (SWD, ECHA, Gammon Technical Products)
  • Echantillonneur 4, 7, 20 et 80 litres
  • Systèmes « d’homme mort » et accessoires
  • Enrouleurs et câbles de masse
  • Additiveur Hammonds
  • Stainless Steel buckets for fuel sampling, 8, 10, 12 or 15 litre capacity with bonding wire and clip. ( voir plus)
  • Brass heavy duty bonding clips/cables for sampling buckets and aviation refuelling nozzles.
  • Hydrometers and thermometers for fuel density measurement and associated ASTM density correction tables.
  • Hydrometer jars, glass and plastic. ( voir plus)
  • Water detector capsules and syringes. ( voir plus)
  • Water finding paste and paper for fuel systems.
  • SONDE ELECTRONIQUE Niveau Température
  • Interface UTIMETER OTEX
  • Fuel finding dip paste.
  • Fuel sample retention and transport containers, 1 litre and 5 litre capacity, epoxy lined tinplate, available with associated transport cartons. IATA approved for transport of fuel samples by air.
  • Fuel sample retention containers, epoxy lined tinplate, wire sealable for general fuel sample retention.
  • Fuel contamination test kits and colormetric/gravimetric capsules and membranes.
  • Tank dip tapes. ( voir plus)
  • Piges et accessoires pour le jaugeage d’hydrocarbures
  • Tank sample thief, Stainless Steel, 1 litre.
  • Pressure test pumps and associated threaded adapters.
  • Emcee fuel conductivity meters.
  • Sealing wire, lead seals and sealing pliers.
  • Stainless Steel locking wire. 
  • Nitrile gloves for fuel handling and equipment maintenance duties.
  • Self adhesive decals and tapes for fuel grade marking on pipelines and tanks.
  • Syringe, 5ml Nylon, reusable, for use with water detector capsules
  • Water Detector Capsules  (Pastilles de détection d’eau )
  • Single test membranes, Colourmetric contamination testing, complete with support pads, GTP1983  ( voir plus)
  • Matched weight membrane pairs, Gravimetric contamination testing, GTP1984  
  • Hydrometer, BS718 M50SP, 0.850 to 0.900, complete with C of C
  • Hydrometer jar, glass, with pouring spout, 65mm diameter by 350mm long
  • Hydrometer jar, plastic, with pouring spout, 55mm diameter by 345mm long
  • Hydrometer jar, plastic, with overspill cup, 43mm diameter by 385mm long, GTP1073 ( voir plus)
  • Thermometer ASTM12C/ IP64C, minus 20 To plus 102 degC,   complete with C of C
  • Thermometer ASTM12C/ IP64C, minus 20 to plus 102 degC, blue spirit filled (non hazardous), complete with C of C ( voir plus)
  • Thermometer IP53C, 0 to plus 80 degC, complete with C of C
  • Thermometer IP53C, 0 to plus 80 degC, blue spirit filled (non      hazardous), complete with C of CThermometer IP49C, minus 15 To plus 40 degC, complete with      C of C
  • Thermometer IP49C, minus 15 to plus 40 degC, blue spirit filled (non hazardous), complete with C of C
  • Thermometer IP39C minus 1 to plus 38 deg C, 0.1 deg C steps 450mm long, complete with C of C
  • Thermometer ASTM63C, minus 8 to plus 32 deg C, 0.1 deg C steps 384mm long, complete with  C of C
  • Density correction calculator disc, suitable for JET A1 and Avgas
  • DIFFERENTIAL PRESSURE GAUGE GAMMON 0-30 PSI (0-2 BAR) – PUSH BUTTON IN FRONT
  • DIFFERENTIAL PRESSURE GAUGE ALUMINIUM 0-2 BAR (0-30PSI) GTP-534-30A
  • 3/4” GENUINE APOLLO SPRING RETURN BALL VALVE F/F BSP 
  • BOX OF 100 COLORIMETRIC MEMBRANES+100 SUPPORT PADS ( voir plus)
  • BOX OF 48 MATCHED WEIGHT MONITORS GAMMON GTP-1986
  • TEST KIT MICROBMONITOR 2 5 TEST KIT IN A BOX
  • 15M ORANGE COILED CÂBLE FOR DEADMAN HANDLE
  • SYRINGE HOLDER FOR SHELL WATER DETECTOR TEST
  • DIGITAL CONDUCTIVITY METER EMCEE 1152
  • KOLOR KUT WATER FINDING PASTE – 85GR
  • KOLOR KUT FUEL INDICATING PASTE – JAR OF 62GR
  • CARTER U/W NOZZLE MAINTENANCE TOOL BOX ( voir plus)
  • 3”DRY DISCONNECT HOSE UNIT COUPLER THREAD F 3”BSP Ø119MM
  • UNDERWING NOZZLE CARTER 64200 CF4L7K
  • UNDERWING NOZZLE CARTER 64348 CF4U7K
  • MANNTEK DRY AVIATION COUPLING ISO45 – FEM 2”1/2 BSPP
  • ACCROCHEUR HYDRANT 4” 64910 SANS CHARIOT ( voir plus)
  • ACCROCHEUR D’HYDRANT 4” CARTER 64910 AVEC RÉGULATEUR ET CHARIOT
  • VANNE DE REGULATION 3″ CARTER 64500
  • PISTOLET JET OPW 295SAJ0200 – RACCORD FEMELLE 1”1/2 NPT
  • VANNE REGULATRICE 4” CARTER 64510
  • PISTOLET JET ELAFLEX ZVF50 FEMELLE 1”1/2 BSPP POUR EMBOUT À VISSER ( voir plus)
  • ACCROCHEUR D’AILE CARTER 64348 CF4U7K
  • ACCROCHEUR D’AILE CARTER 64200 CF4L7K
  • MANOMÈTRE DE PRESSION DIFFÉRENTIELLE EN ALUMINIUM 0-2 BAR (0-30 PSI) GTP-534-30A
  • CARTOUCHE COALESCENTE I-63387TB
  • CARTOUCHE ABSORBANTE AQUACON ACO-63301P
  • Cartouche coalescente I-633C5TB  ( voir plus)
  • Cartouche coalescente I-628C5TB
  • Cartouche coalescente I-656C5TB
  • Cartouche coalescente I-644C5TB
  • Cartouche coalescente i-6337tb velcon ( voir plus)
  • Cartouche coalescente I-63387TB
  • Cartouche coalescente I-638C5TB
  • Cartouche coalescente I-622C5TB
  • Cartouche coalescente I-656C5
  • Cartouche coalescente I-644MMTB VELCON
  • Cartouche coalescente I-644A4TB Velcon
  • Cartouche coalescente OS-60988 Parker Velcon
  • Cartouche coalescente/séparatrice OS-61288
  • 20L HYDROCARBON SPILL KIT (FUEL & OIL) 
  • PNEUMATIC PRESSURE GAUGE TEST KIT CPGKITP
  • WATER DETECTING PASTE BATCH 12 TUBES OF 85GR ( voir plus)
  •  CAPSULE SHELL WATER DETECTOR (SWD) & SERINGUE NYLON POUR CAPSULE SWD
  •  MEMBRANE COLORIMETRIQUE- CAPSULES MILLIPORES COLORIMÉTRIQUE GAMMON GTP-1985
  •  CONDUCTIVIMÈTRE DIGITAL EMCEE 1152 ( voir plus)
  •  PÂTE DÉTECTRICE D’EAU KOLOR KUT TUBE 85GR
  •  KIT ANTI POLLUTION HYDROCARBURE
  •  PÂTE INDICATRICE DE NIVEAU D’HYDROCARBURE KOLOR KUT
  •  TEST MANOMETRE PNEUMATIQUE REGLAGEETALONNAGE CPGKITP
  • PATE DETECTRICE EAU
  • PISTOLET JET OPW 295SAJ0200 – RACCORD FEMELLE 1”1/2 NPT
  • PISTOLET JET EMCO WHEATON G180-PSTB + EMBOUTS PLAT & ROND
  • KIT JOINT DE VANNE PISTOLET EMCO WHEATON G180 – 800206
  • PISTOLET JET ELAFLEX ZVF50 FEMELLE 1”1/2 BSPP POUR EMBOUT À VISSER (SIC)
  • ACCROCHEUR HYDRANT 4” 64910 SANS CHARIOT ( voir plus)
  • ACCROCHEUR D’AILE CARTER 64348 CF47K
  • ACCROCHEUR D’AILE CARTER 64200 CF4L7K
  • ACCROCHEUR D’AILE CARTER 64348 CF4U7K
  • PRISE DE REMPLISSAGE AVION MANNTEK ISO45 – BRIDE ASA 2”½
  • COUPLEUR INDUSTRIEL ALU 3- DN80 Ø119MM ENTREE 3”BSP
  • PRISE DE REMPLISSAGE API 4” SANS LEVIER – BRIDE TTMA
  • CARTOUCHE ABSORBANTE CDF-230
  • MANCHON ÉLASTIQUE ELAFLEX DN100 SPIRALE VSD – BRIDES ALU
  • VALISE D’OUTILLAGE POUR MAINTENANCE D’ACCROCHEUR D’AILE CARTER
  • CLAPET REMPLISSAGE & ASPIRATION 4” CARTER 64055A
  • Pastilles détectrice d’eau
  • Pâte à mesurer le niveau d’eau
  • Accrocheur aviation 64348
  • Clapet de fond hydraulique type Whessoe ,

• Clapet de fond pneumatique
• Couvercle de trou d’homme
• Event de pression/dépression-Yak EN
• Jauge de citerne BAYHAM DN 150 DN250
• BAYHAM LTD 36607 JAUGE DE NIVEAU À FLOTTEUR
• JAUGE RUBAN INOX NOIR + SONDE LAITON SPEC PETROLE 20 METRES
• PIGE DE JAUGEAGE COMPLETE NOIR 20M- LEST LAITON 600gr
• PIGE DE JAUGEAGE, RUBAN EN ACIER INOXYDABLE,  LEST LAITON
• JAUGE ÉTALON INOX 100 LITRES SUR ROULETTESAVEC CERTIFICAT
• PATE A JAUGER – KOLOR KUT – Pot De 62 Gr.
• PATE DETECTRICE D‘EAU – KOLOR KUT – Tube De 85 Gr.
• SABRE DE JAUGEAGE – HOMOLOGUE CEE CLASSE II + CURSEUR LAITON
• PATE DETECTRICE D‘EAU – KOLOR KUT – Tube De 85 Gr.
• PATE INDICATRICE D’HYDROCARBURE – AFA – Tube De 60 Gr.
• Limiteur de remplissage pneumatique
• Sonde de niveau optique
• Soupape de surpression
• Indicateur pression différentielle
• Poignée homme mort
• Pistolet Elaflex ZVA25 avec raccord cassant
•  AVIATION FILTRATION ( voir plus)
  • Filter Water Separator Vessels
  • Filter Monitor Vessels
  • Micro Filter Vessels
  • Coalescer Elements
  •  Separator Elements
  •  Monitor Elements
  •  Micro Filter Elements
  •  Spares and Accessories
• AVIATION FUEL NOZZLES ( voir plus)
  •  Underwing Refuelling Nozzles
  •  Schultz Nozzle Gauge Guard
  • Overwing Refuelling Nozzles
• AVIATION FUEL QUALITY CONTROL ( voir plus)
  •  Fuel Testing Components
  • Fuel Sample Components
  • Sample Jars
  • Product Recovery Tanks
  • Aviation Safety Decals
• AVIATION EARTH BONDING ( voir plus)
  • Manual Rewind
  • Spring Rewind
  • Positive Earth Bonding
• AVIATION HOSES ( voir plus)
  • Aviation Refuelling Hoses
  •  Aviation Suction/Discharge Hoses
  •  Aviation Special Hoses
  • Hose End Fittings
• AVIATION FLOW MEASURING ( voir plus)
  • Flow Meter ( Liquid Control, SATAM)
  • Master Meters
• AVIATION VALVES AND COUPLINGS
•  Hydrant Pit Valves
• Pressure Control Coupling
• Dry Disconnect and ISO45 (Aviation) Couplings
•  Robinets de reprise liquide
•  Vannes niveau maxi
•  Robinets pointeau
•  Robinets à volants  API 6D pour GPL
•  Robinets à fermeture rapide
•  Pousse clapets
•  Pistolet de carburation
•  Vannes à boisseau sphérique
•  Vannes internes
•  Excess flow valves
•  Check lok excess flow valves
•  Back pressure check valves
•  Double check filler valves
•  Filler hose adapters
•  Relief valves
•  Isolation valves
•  REGO Manifolds
•  Magnetic gauges for tanks and  trucks
•  Clapets de fond pour citerne , cuves, cigares, résevoirs de stockage GPL
•  Rotogauges
•  Slip tube gauges
•  Pressure gauges
•  Thermometers
•  Sight flow indicator
•  Pressure Regulators REGO
•  Excess pressure valves
•  ACME couplings
•  Gaskets ACME caps
•  Couplings with housing
•  WECO couplings pounds service couplings
•  Welding couplings
•  Kits for filler valve displaced
•  Flanges/ gaskets
•  Vapor service valves
•  REGO  Multivalves
•  Multipurpose valves
•  Transfert valves
•  Combination valves
•  Needle valves
•  Globe and angle valves
•  Quick acting valves
•  Filler valves adaptors
•  GPL gas gun REGO
•  Ball valves
•  Internal valves
•  Vannes WHESSOE
•  Vannes internes pneumatiques
•  Ensembles de mesurage GPL  ( Filtres ,  Séparateur d’air (dégazeur), Imprimeur de ticket, Afficheur mécanique ou électronique, Sonde de température permettant la compensation du volume, Clapet différentiel ou vanne de présélection)
•  Clapets hydropneumatiques
•  Pompes à main pour la commande des clapets de fond whessoe ou REGO.
•  Flexibles GPL inox
•  Flexibles GPL elastomères
•  Raccords tournants pour bras de chargement GPL
•  Raccords anti-arrachement pour bras de chargement GPL
•  Raccords cassants pour bras de chargement GPL
• Enrouleurs pour camion citerne GPL
•  Boitier d’arrêt à distance
•  Filtres GPL
•  Filtres GPL  à souder
•  Compteurs Liquid Controls,  Compteurs Neptune,  Débitmètres de precision  à turbine
•  Pompes Blackmer,  Pompes Smith
•  By pass Blackmer
•  Pompes Corken
•  By pass Corken
•  Groupe moto compresseur Corken
•  Compresseurs Corken
•  WHESSOE Safety Hydraulic valves
•  Internal pneumatic valves
•  Hydropneumatic valves
•  Hands pumps
•  Stainless steel hoses
• – Elastomer hoses
•  Rotary coupling
• DOUBLES CLAPETS D’EMPLISSAGE COURTS
• DOUBLES CLAPETS D’EMPLISSAGE LONGS
• ROBINETS DE DEPART GAZ HORIZONTAL
• ROBINETS DE DEPART GAZ VERTICAL
• CLAPETS ET ROBINETS DE REPRISE LIQUIDE
• ENSEMBLES SOUPAPES A QUEUE CYLINDRIQUE
• ENSEMBLES SOUPAPES A QUEUE CONIQUE
• SOUPAPES DE SURETE POUR CANALISATION
• JAUGES DE NIVEAU MAGNETIQUES
• MANCHONS RACCORDS ISOLANTS
• DETENDEURS POUR CITERNE
• LIMITEURS POUR CITERNE
• DETENDEURS POUR APPLICATIONS INDUSTRIELLES
• DETENDEURS CLIP AUTOMATIQUES
• VALVES CLIP AUTOMATIQUES
• ROBINETS DE BOUTEILLE GPLEQUIPEMENTS POUR PHASE LIQUIDE
• ELECTROVANNES
• FILTRES EN Y
• LYRES ET FLEXIBLES
• DETECTEURS ET APPAREILS DE CONTROLE
• COMPTEURS DE GAZ A MEMBRANE
• ROBINETS SPECIAUX
• ENSEMBLES SOUS COFFRET
• ACCESSOIRES POUR CITERNES
• RACCORDS ISO, ACME
• Indicateur de mise à la terre
• ARRÊTE-FLAMMES EN LIGNEArrête-flammes Anti-détonation
• QUICK OPENING CLOSURESFermetures à ouverture rapide
• PIG Systèmes de Raclage
• COUPLEURS SECS APICoupleurs Hydrocarbures API1004
• Raccords Tournants
• COUPLEURS SECS ALPHA GPL Alpha Process Coupleurs
• COUPLEURS AVIATION Coupleurs secs ISO45 MANNTEK ELAFLEX et TODO
• COUPLEURS SECS GPL Coupleurs Secs pour Gaz MANNTEK ELAFLEX et TODO
• EMERGENCY BREAK-AWAYS -Bolt Break-away
• Check Filler Valves, REGO 6584C, 2″
• Double Check Filler Valve, REGO 6584C, 2″
• Filler valves, RegoCheck Filler Valves, REGO 6584C, 2
• Double check Filler Valves, REGO 6579C, 1 1/4″
• Filler valves, Rego Double ChecK Filler Valves, REGO 6579C, 1 1/4
• Double Check Filler Valves, REGO FI7579CT, 1 1/4″
• Filler valves, RegoDouble Check Filler Valves, REGO FI7579CT, 1 1/4     
• REGO Filler Hose Adapter 7577V M/F 13/4″ ACME
• Filler valves,
• REGO Filler Hose Adapters 7577V       
•  REGO Hose Couplings 3175A
• REGO Short Type Hose Coupling 3175A 1″ M.NPT x 1.3/4″ F.ACME
• Filler valves, REGO Hose Couplings 3175A   
•    REGO Hose-End Valve A7797 1″
• REGO Quick Acting Hose-End Valve A7797 1″
• Filler valves, REGO Hose-End Valve A7797 1       
• REGO Hose Coupling A7575L4 1″ NPT M x 13/4″ F.ACME
• RegO Lpg Gas Anhydrous Ammonia Relief Valves 3149 Series
• RegO High Pressure Gas Master Valves HP9560 Series
• RegO LPG Relief Valve 3127G
• RegO Swing-Check ESVs for Bulk Plants A6016 Series and A6024 Series
• RegO Pull-Away Valves for Transfer Operations A2141 Series
• RegO LPG Relief Valve 3129G
• RegO LPG Globe Valve / Angle Valve
• RegO LPG Excess Flow Check Valve
• RegO LPG Emergency Shut Off Valve
• RegO LPG Back Pressure Check Valve
• RegO Long Stem Valve / Short Stem Valve / Economizer
• RegO Relief Valve for Gas & Cryogenic Systems
• RegO Double Back Check Filler Valve L6579C Series
• RegO In-Line 1/2″ Fill Check Valve – NG-304SSA
• lpg breakaway coupling
• FAS-LPG METER CATALOGUE

OFFER REQUEST